Welcome to Hangzhou Delixi Group Co.,Ltd. website!

Points for replacing the carbon brush of TND2 series stabilizer

Nov 27, 2019

when the carbon brush is replaced, the carbon brush pressure should be adjusted appropriately, and the adjustment method is as follows: loosen the carbon brush assembly screws installed in the shaft of the motor, and press the carbon brush assembly in order to make the carbon brush be elastic with 3-5mm, and then fasten screws. If carbon brush is unable to well touch the contact surface of the coil, cloth cushion should be placed between carbon brush and the plane of coil, and then rotate the carbon brush once while it's smooth.